Log-in

Just decide on whether you would like to cover your FULL wall or just a PARTIAL wall with one of our custom wall murals.

We deliver your WALL MURALS as a whole rectangle or square, for you to easily make necessary cutaways during installation.


 

FULL WALL MURAL MEASUREMENT INSTRUCTION

 

Measure the total width and height, from the longest and widest points. You only need the dimensions of the surface you wish to cover, exclude any skirting boards or crown moldings in the measurements.

 

  • Width – Measure the horizontal distance of the wall, from corner to corner.
  • Height – Measure the vertical height at each corner of the wall. If you walls are not perfectly square, or there is a difference in height, select the greater of the two height measurements.

 

If your wall or ceiling is sloped, only measure the longest and widest parts and ignore the slopes.

 

Use below diagram to help you with measuring your wall.

 

 

 

 

PARTIAL WALL MURAL MEASUREMENT INSTRUCTIONS

 

Define the area of the wall you would like to cover, and place registration mark that define this area. Measure the total width and height, which are the longest and points between your registration marks.

 

  • Width – Measure the horizontal distance between registration marks.
  • Height – Measure the vertical height at each corner of the registration mark. You may want to cover a variety of heights. In case of difference in height, always select the greater of the two height measurements.

       

      Use below diagram to help you with measuring your wall

       

       

      Scroll to top