Log-in

Just follow the below guidelines for each wall mural finish type to install your wall mural. Furthermore be sure to read the do’s and don’ts of installation before starting.

 

MATT WALL MURAL TYPE ONLY

 

  • Ensure you wall surface is smooth and clean. The area can be easily cleaned with a sponge and water to remove any debris. In the event of damaged surface, we suggest you contact an installer
  • Watch below video for installation steps

 

CANVAS OR GLITTER TEXTURED WALL MURAL TYPE ONLY

 

  • Ensure you wall surface is smooth and clean. The area can be easily cleaned with a sponge and water to remove any debris. In the event of damaged surface, we suggest you contact an installer
  • Either contact an installer or use paste .....xxxxx

 

 

DO’s of installation

 

  • DO install your wall mural in a bathroom or any other area with high-moisture content. Just make sure to take the relevant Make sure to choose a wall mural with water-based polyurethane that is water-resistant. If you detect the presence of moisture behind the walls, you should use an adhesive containing mildewcide (used to kill mildew/moulds) to prevent the moisture from seeping into your wall mural.

(THIS NEEDS TO BE MADE AS A SEPARATE NOTE FOR SEPARATE PURCHASE )

 

DON’T’s of installation

 

  • Do not install a new wall mural over an existing one. Old wallpapers may lend a lumpy, layered look to the new wallpaper and hamper its finish. For best results, always install a new wall mural after removing the older one.

     

  • Do not install a new wall mural on a non flat wall surface. For best results, wall murals must be installed on absolutely flat/smooth surfaces. Therefore, we recommend that you choose a smooth surface for installing our wall murals to avoid bumps and achieve a perfect finish.

 

  • Do not install a new wall mural on a recently painted wall. Wait for a few days so that the paint dries off completely. Wall murals applied on wet and freshly painted walls may not stick to the surface properly or may cause the adhesive to stick to the paint.

 

Scroll to top